|
|
Design forms
Following design forms are available:
Design V1| Design V1 (Variance A) |
|---|
 | Vertical design with:
- 2 bearing shields
- 2 roller bearings
- housing without mounting feet
- mounting flange
- free shaft end (DE) for loose coupling
- overall shaft length. max. 2,9m
- grease duct (DE)
- regreasing pipe lead out at DE side
|
| Design V1 (Variance B) |
|---|
 | Vertical design with:
- 2 bearing shields
- 2 roller bearings
- housing without mounting feet
- mounting flange
- free shaft end (DE) for loose coupling for flywheel or turbine runner
- conical tube with oil pressure torque limiter (max. 190mm)
- overall shaft length. max. 2,9m
- grease duct (DE)
- regreasing pipe lead out at DE side
|
| Design V1 (Variance D) |
|---|
 | Vertical design with:
- 2 bearing shields
- 2 roller bearings
- housing without mounting feet
- mounting flange
- free shaft end (DE) for built in flywheel and external turbine runner (max. 190mm)
- conical tube with oil pressure torque limiter (max. 190mm)
- overall shaft length. max. 2,9m
- grease duct (DE)
- regreasing pipe lead out at DE side
|
Design B3| Design B3 (Variance S) |
|---|
 | Horizontal design with:
- 2 bearing shields
- 2 roller bearings
- housing with mounting feet
- 1 or 2 free shaft ends for loose clutch (DE / NDE)
|
| Design B3 (Variance K) |
|---|
 | Horizontal design with:
- 2 bearing shields
- 2 roller bearings
- housing with mounting feet
- 1 free shaft end (DE) for flywheel or turbine runner
- overall shaft length. max. 2,9m
- conical tube with oil pressure torque limiter (max. 190mm)
- regreasing pipe lead out at DE side
|
| Design B3 (Variance T) |
|---|
 | Horizontal design with:
- 2 bearing shields
- 2 roller bearings
- housing with mounting feet
- 2 free shaft ends (DE/NDE) for flywheel and turbine runner
- overall shaft length. max. 2,9m
- conical tube with oil pressure torque limiter (max. 190mm)
- regreasing pipe lead out at (DE and NDE side)
|
| Design B3 (Variance W) |
|---|
 | Horizontal design with:
- 2 bearing shields
- 2 sleeve bearungs
- housing with mounting feet
- 1 free shaft end (DE) for loose clutch
- overall shaft length. max. 2,9m
|
Design B16| Design B16 (Variance E) |
|---|
 | Horizontal design with:
- 1 bearing shields
- 1 roller bearings
- housing with mounting feet
- 1 free shaft end (disc)
- overall shaft length. max. 2,9m
|
| Design B16 (Variance U) |
|---|
 | Horizontal design with:
- 1 bearing shields
- 1 roller bearings
- housing with mounting feet
- 1 free shaft end (flange)
- overall shaft length. max. 2,9m
|
| Design B16 (Variance V) |
|---|
 | Horizontal design with:
- 1 bearing shield
- 1 sleeve bearing
- housing with mounting feet
- 1 free shaft end (flange)
- overall shaft length. max. 2,9m
|
|
